SEW DOP11C Operations Instructions download pdf (Page 22)

Compact Operating Instructions – DOP11C

Mounting the operator panel

Installation

4.3 Mounting the operator panel

How the operator panel is mounted depends on the unit type:

• DOP11C-40, -70 and -100

Use all the retaining slots and the brackets and screws supplied to mount the

operator panel.

• DOP11C-120 and DOP11C-150

Mount the operator panel to its designated spot using 8 screws (Torx, M4).

Loosen the screw [1] with a screw driver (Torx, TX7) [2] until the retaining clamp tilts

up. Then tighten the screw clockwise (0.4 Nm) until the retaining clamp is pressed

against the housing wall.

Repeat the procedure for the remaining screws.

4249326347 4249328011

8953957771

[1] Screw (Torx, M4)

[2] Screw driver (Torx, TX7)

[3] Retaining clamp

0.5 - 1.0 Nm

[1]

[2]

[3]

TX7

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 47 48

No comments

SEW DOP11C Operations Instructions Page 22